Audi a6 c6 AUDI A6 2000 C5 / 2.G Changing Clutch 5Speed Manual Gearbox

Page 13 of 71

→ Fig.1 Removing clutch slave cylinder and detaching pipe
Removing
‒ To remove the pipe, lever out the clamp -A-
to the retainer using a screwdriver. Only
then can the pipe be removed.
Installing
‒ Press in securing clip -A- to stop.
‒ Push pipe into slave cylinder until it audibly
engages. Page 4 of 45-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141311.xml?xsl=2

Page 19 of 71

cylinder. Clip pin onto clutch pedal.
‒ → Press retaining clip -C- home.
‒ Push pipe -B- into master cylinder
until it audibly locks in place.
‒ Insert rubber grommet -D- over
connection pipe/supply hose -A- into
the cross panel.
‒ Push supply hose -A- for the brake
fluid reservoir on to limit stop.
‒ Remove special tool 3094.
‒ After installing the master cylinder,
bleed the clutch system =>Page 30-30.
‒ If fitted, check the adjustment of the
clutch pedal switch -F 36 => Page
30-8.
‒ Install storage compartment for
driver's side: => General Body Assembly, Interior; Repair group 68; Storage compartments, covers; Removing driver's storage compartment Page 6 of 65-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141312.xml?xsl=2

Page 25 of 71

‒ Unscrew the hexagon socket-head bolt -
arrow- and then pull the slave cylinder to
the rear out of the gearbox. → Fig.3 Detaching slave cylinder from hose/pipe assembly
Removing
‒ To remove the hose/pipe assembly, lever
out clip -A- to the stop using a screwdriver. Only then can the hose/pipe assembly be
pulled out.
Installing
‒ Press in clip -A- to stop.
‒ Push hose/pipe assembly into slave
cylinder until it engages audibly.
‒ To check, pull on the hose/pipe assembly. → Fig.4 Coat clutch slave cylinder with grease before installing
‒ Lightly lubricate contact surface for push
rod at clutch release lever with copper
grease, e.g. Z 381 351 TE.
‒ Before fitting slave cylinder into gearbox
housing, lubricate area -a- on boot with
lithium grease G 052 150 A2. → Fig.5 Installing clutch slave cylinder Notes:
◆ If the clutch slave cylinder -4- is inserted Page 5 of 65-Speed Manual Gearbox 01A 4WD4.3.2014vw-wi://rl/A.en-GB.4B-S-S01AA.wi::21141314.xml?xsl=2